Natural4spas Hose Filter - Directions For Use

The Natural4spas Hose Filter removes contaminants like chlorine, chemicals, and dissolved metals. Filter can be used on either end of hose. Be sure the water flow is going in the same direction as the arrow on the filter

Flush garden hose before attaching the filter to the hose. Run water through the filter for one minute or until the water is clear, and then insert in spa. For best results, use a flow rate of 2 gallons per minute.

If the flow rate slows or becomes plugged, reverse flow through the filter to remove sediments.

Save end caps for storing your filter.  Keep the filter wet while storing in the bag supplied.